AAP Elite S series Manual de usuario descargar pdf (Pagina 12)

DISABLE CHIME ZONES

Any detector on your ELITE S can be programmed to trigger an output or

the buzzer at your keypad when movement is detected. These are called

Chime Zones. Chime zones are normally only active during the disarm

state but if programmed by your installer, they can work as Chime zones

at all times (armed or disarmed). Your installer can also give you the ability

to disable the Chime Zone monitoring via the keypad when it is not re-

quired.

To Disable Chime Zone Monitoring at an LED or AAP LCD keypad press

and hold;

<CONTROL> followed by <PROGRAM>

The “Aux (0)” LED will turn on indicating the Chime Zones are disabled on

the LED keypad or;

the words “CHIME OFF” will appear on the LCD keypad

The Display will timeout after 20 seconds back to the normal display or

you can press the <ENTER> button to go back to the normal display.

To re-enable Chime Zone monitoring press and hold;

<CONTROL> followed by <PROGRAM>

The “Aux (0)” LED will turn off indicating the Chime Zones are now active

on the LED keypad or;

the words “CHIME ON” will appear briefly on the LCD keypad

The Display will timeout after 20 seconds back to the normal display or

you can press the <ENTER> button to go back to the normal display.

To Disable the Chime Zone Monitoring at a Crow LCD keypad press;

<CHIME> (Hold for 2 seconds)

The LCD display will read “CHIME OFF”

The Display will timeout after 20 seconds back to the normal display or

you can press the <ENTER> button to go back to the normal display.

To re-enable the Chime Zone Monitoring at a Crow LCD keypad press;

<CHIME> (Hold for 2 seconds)

The LCD display will read “CHIME ON”

The Display will timeout after 20 seconds back to the normal display or

you can press the <ENTER> button to go back to the normal display.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

AAP Elite S series Manual de usuario Pagina 12