AAP Elite S series Manual de usuario descargar pdf (Pagina 19)

To change the DTMF Output Control code press;

#### = 1-4 digit code

To change the DTMF Microphone Control code press;

#### = 1-4 digit code

To change the DTMF Voice/Domestic Alarm Acknowledge code press;

#### = 1-4 digit code

To change the DTMF Force Test Call code press;

#### = 1-4 digit code

PROGRAMMING/DELETING or FINDING RADIO KEY CODES or

ACCESS TAGS

The alarm system can have up to 80 radio users programmed. The op-

tional receiver board must be fitted to allow radio users to work. Radio us-

ers can be programmed at User locations 21-100. It can alternatively have

up to 100 access control tags or cards programmed at user locations 1-

100. There must be at least one proximity reader connected to the panel

for access tags/cards to work. The owner can add/remove or find radio

users or access tags from CLIENT program mode.

To Learn a new Radio User press;

21-100 is User number 21-100. When in learn mode the keypad will beep

at one second intervals for 30 seconds. You must operate the radio key

within this period to learn it into the panel.

To Delete an existing Radio User press;

21-100 is User number 21-100. You must enter the exact Radio User you

wish to delete.

To Find an Existing Radio User press;

During find mode the keypad will beep at one second intervals for 30 sec-

onds. You must operate the radio key within this period. If the radio User

code is found in memory the User number will be displayed at the keypad.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

AAP Elite S series Manual de usuario Pagina 19