AAP Elite S series Especificaciones descargar pdf (Pagina 31)

Page 31

P591E Zone Group #1 Contact ID Tamper Code (Default = 137)

P592E Zone Group #2 Contact ID Tamper Code (Default = 137)

P593E Zone Group #3 Contact ID Tamper Code (Default = 137)

P594E Zone Group #4 Contact ID Tamper Code (Default = 137)

P595E Zone Group #5 Contact ID Tamper Code (Default = 137)

P596E Zone Group #6 Contact ID Tamper Code (Default = 137)

P597E Zone Group #7 Contact ID Tamper Code (Default = 137)

P598E Zone Group #8 Contact ID Tamper Code (Default = 137)

P599E Zone Group #9 Contact ID Tamper Code (Default = 137)

P600E Zone Group #10 Contact ID Tamper Code (Default = 137)

P601E Zone Group #11 Contact ID Tamper Code (Default = 137)

P602E Zone Group #12 Contact ID Tamper Code (Default = 137)

P603E Zone Group #13 Contact ID Tamper Code (Default = 137)

P604E Zone Group #14 Contact ID Tamper Code (Default = 137)

P605E Zone Group #15 Contact ID Tamper Code (Default = 137)

P606E Zone Group #16 Contact ID Tamper Code (Default = 137)

P607E Zone Group #17 Contact ID Tamper Code (Default = 137)

P608E Zone Group #18 Contact ID Tamper Code (Default = 137)

P609E Zone Group #19 Contact ID Tamper Code (Default = 137)

P610E Zone Group #20 Contact ID Tamper Code (Default = 137)

ZONE GROUP REPORTING ACCOUNT NUMBER

If a zone is in more than one Area, this address allows you to program which account code it will use when reporting

alarms.( 1 = Area A, 2 = Area B, 3 = Area C, 4 = Area D). If a zone is only in one area it will automatically default to

reporting to that area (eg if only

in area C, the zone will report to the area C account). If it is in 2 or more areas

however it will always report to area A unless changed at this address (eg if a zone was in areas B & C but the zone

group option below for that zone was set to 1, the zone will report to the area A account). In this example you would

need to decide which account you want the zone to report to and change it to a value of 2 or 3. Also, when a zone is

in 2 or more areas the area associated with the zone below will be used in the memory to record the area for that

zone.

P611E Zone Group #1 Account # - Default 1

P612E Zone Group #2 Account # - Default 1

P613E Zone Group #3 Account # - Default 1

P614E Zone Group #4 Account # - Default 1

P615E Zone Group #5 Account # - Default 1

P616E Zone Group #6 Account # - Default 1

P617E Zone Group #7 Account # - Default 1

P618E Zone Group #8 Account # - Default 1

P619E Zone Group #9 Account # - Default 1

P620E Zone Group #10 Account # - Default 1

P621E Zone Group #11 Account # - Default 1

P622E Zone Group #12 Account # - Default 1

P623E Zone Group #13 Account # - Default 1

P624E Zone Group #14 Account # - Default 1

P625E Zone Group #15 Account # - Default 1

P626E Zone Group #16 Account # - Default 1

P627E Zone Group #17 Account # - Default 1

P628E Zone Group #18 Account # - Default 1

P629E Zone Group #19 Account # - Default 1

P630E Zone Group #20 Account # - Default 1

ZONE GROUP VIBRATION SENSITIVITY

If the zone group is set to vibration mode (P471E-P490E Option 8 on) then the sensitivity is set at this address. The

sensitivity range is from 1-8 where 1 = Highest Sensitivity and 8 = Lowest Sensitivity setting.

P631E Zone Group #1 Vibration Sensitivity - Default 1

P632E Zone Group #2 Vibration Sensitivity - Default 1

P633E Zone Group #3 Vibration Sensitivity - Default 1

P634E Zone Group #4 Vibration Sensitivity - Default 1

P635E Zone Group #5 Vibration Sensitivity - Default 1

P636E Zone Group #6 Vibration Sensitivity - Default 1

P637E Zone Group #7 Vibration Sensitivity - Default 1

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 102 103

Comentarios a estos manuales

Sin comentarios

AAP Elite S series Especificaciones Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AAP Elite S series