AAP Elite S series Especificaciones descargar pdf (Pagina 46)

Page 46

PROGRAMMING KEYPAD OPTIONS

PROGRAMMING KEYPAD OPTIONSPROGRAMMING KEYPAD OPTIONS

PROGRAMMING KEYPAD OPTIONS

KEYPAD OPTIONS - P780E - P813E

The block of addresses from P780E to P811E are used to assign the basic options of each keypad in the system.

Each of the addresses from P780E to P811E may have 8 options assigned where the 8 options represent the keypad

address number, i.e. if options 1, 2 & 4 are enabled at address P780E then keypads 1, 2 and 4 would be assigned to

area "A". By default, all keypads are set to keypad address #1. Addresses P812E & P813E are special functions that

only apply to the LCD keypads that have the dedicated “A” & “B” buttons.

NOTE: A keypad can only be used to control the area to which it has been assigned.

P780E 1-8 Keypads assigned to Area A

If the option is On, the keypad is assigned to Area A.

P781E 1-8 Keypads assigned to Area B

If the option is On, the keypad is assigned to Area B.

P782E 1-8 Keypads assigned to Area C

If the option is On, the keypad is assigned to Area C.

P783E 1-8 Keypads assigned to Area D

If the option is On, the keypad is assigned to Area D.

P784E 1-8 Keypads with permission to fully Arm

If the option is On, the keypad is allowed to Arm the assigned Area/s.

P785E 1-8 Keypads with permission to arm Stay Mode

If the option is On, the keypad is allowed to Arm Stay Mode for the assigned Area/s.

P786E 1-8 Keypads with permission to use the Control Button

If the option is On, the keypad can operate the “Control” button.

P787E 1-8 Keypads with permission to Bypass

If the option is On, the “Bypass” button on the keypad is enabled.

P788E 1-8 Keypads with Panic button enabled

If the option is On, and an LCD keypad with the single “PANIC” button is connected to the panel,

the “Panic” button is enabled.

P789E 1-8 Keypads with delayed Panic button enabled

If the option is On, and an LCD keypad with the single “PANIC” button is connected to the panel,

the “Delayed Panic” feature is enabled. The button must be pressed for two seconds (delayed) to

create a panic alarm. The option at address P788E MUST be off for the delayed option to work.

P790E 1-8 Keypads with Dual Button Panic Alarm enabled

If the option is On, pressing the “Control” & “Chime” (Crow LCD) or “1” & “3” (AAP LCD) buttons

simultaneously will create a Panic alarm at the keypad.

P791E 1-8 Keypads with Dual Button Fire Alarm enabled

If the option is On, pressing the “A” & “B” (Crow LCD) or “4” & “6” (AAP LCD) buttons

simultaneously will create a Fire alarm at the keypad.

P792E 1-8 Keypads with Dual Button Medical Alarm enabled

If the option is On, pressing the “B” & “Chime” (Crow LCD) or “7” & “9” (AAP LCD) buttons

simultaneously will create a Medical alarm at the keypad

P793E 1-8 Keypads with buzzer mapped to armed alarms

If the option is On, a Zone alarm during the Armed state will cause the Keypad buzzer to sound

(audible alarm) at the keypad. If option 2 is turned on at location P742E the buzzer will be reset

when output 1 reset time (P901E) expires. Otherwise it will sound until the alarm is reset.

P794E 1-8 Keypads with buzzer mapped to stay mode alarms

If the option is On, a Stay Mode Zone alarm during the Armed state will cause the Keypad

buzzer to sound (audible alarm) at the keypad.

P795E 1-8 Keypads with buzzer mapped to 24 hour alarms

If the option is On, a 24 Hour Zone alarm will cause the Keypad buzzer to sound (audible alarm)

at the keypad.

P796E 1-8 Keypads with buzzer mapped to chime mode alarms

If the option is On, a chime Zone alarm will cause the Keypad buzzer to sound (audible alarm) at

the keypad.

P797E 1-8 Keypads with buzzer mapped to armed mode exit delay beeps

If the option is On, the keypad will sound the exit beeps when the system is armed to indicate

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 102 103

Comentarios a estos manuales

Sin comentarios

AAP Elite S series Especificaciones Pagina 46

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AAP Elite S series