AAP Elite S series Especificaciones descargar pdf (Pagina 61)

Page 61

4 = Enabled Throughout the call in Disarm State only

5 = Enabled Throughout the call in Armed State only

6 = Enabled Throughout the call in Stay Mode State only

7 = Listen-in Enabled when the panel answers a call

8 = Hold Line Open after a Voice/Domestic Kiss-off.

P748E option 8 special function mode - If option 8 is turned on at address P748E, the dialler will delay hanging up

the call in Voice Mode following kiss-off and place the panel in DTMF remote control mode. The panel

will send the modem tones and look for DTMF remote control codes in the quiet period. If no DTMF

codes are received within 15 seconds the panel will hang-up. This option will NOT work if Option 8 at

P747E is turned on.

AUTO-ANSWER RING COUNT

P900E 1-99 Auto-Answer Rings - This option defines the number of rings before the panel will auto-answer

the incoming call.

MAINS FAIL REPORT DELAY

P909E 0-999 Mains (AC) Fail Report Delay - The panel, and expanders, are constantly checking that the

mains (AC) supply is present. If the mains supply fails, the dialler will delay reporting the failure for

the duration of the value programmed at this address. If the mains returns before this timer

expires the timer is reset and no mains fail event will be reported. A value from 0-999 seconds

can be programmed as the delay. A value of 0 will result in an instant report of mains failure.

ZONE ALARM REPORT DELAY

P910E 0-999 Report Delay on Zones - This delay pauses the reporting of zone alarms via the dialler for the

programmed period (0 = No delay). A value from 0-999 seconds can be programmed as the

delay. If the alarm is disarmed before this delay expires no alarms will be reported. The delay

pauses the reporting of zone alarms for all reporting formats. The delay can be used to prevent

false alarms from reporting if the user created an alarm on entry in error.

UPLOAD/DOWNLOAD SECURITY OPTIONS

P746E XXXXXXXX. Up to 8 digit security code for upload/download. The security code in the panel must

match that programmed into the PC before data transfer can occur.

P1095E Answer incoming call - provided a user who has option 4 turned on at addresses P221E-P240E

then enters in P1095E while in client program mode and the telephone line is currently ringing, the

panel will answer the incoming call and initiate an upload/download connection.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 102 103

Sin comentarios

AAP Elite S series Especificaciones Pagina 61