AAP Elite S series Especificaciones descargar pdf (Pagina 47)

Page 47

the exit delay has started.

P798E 1-8 Keypads with buzzer mapped to stay mode exit delay beeps

If the option is On, the keypad will sound the exit beeps when stay mode is armed to indicate the

exit delay has started.

P799E 1-8 Keypads with buzzer mapped to entry delay beeps

If the option is On, the keypad will sound the entry beeps to indicate an entry delay has started.

P800E 1-8 Keypad buzzer to warn of sensorwatch or supervised radio timeout alarm

If the option is On, a Supervised Radio signal failure or a Sensorwatch alarm on a zone will cause

the buzzer at the keypad to sound. Pressing any button will silence the beep.

P801E 1-8 Keypads with buzzer mapped to keypad tampers

If the option is On, a keypad tamper alarm (four incorrect attempts to enter in a code) will cause

the buzzer at the keypad to sound.

P802E 1-8 Keypads with buzzer mapped to zone tampers

If the option is On, a zone tamper alarm will cause the buzzer at the keypad to sound.

P803E 1-8 Keypads with buzzer mapped to system tampers

If the option is On, a system tamper or an LCD keypad tamper switch alarm will cause the buzzer

at the keypad to sound.

P804E 1-8 Keypads with buzzer mapped to indicate RF signal blocked

If the option is On, any constant RF data that adds up to more than 30 seconds within a 60

second period (RF Blocked) will cause the keypad buzzer to sound (requires RSSI to be

available on the receiver).

P805E 1-8 Keypads with buzzer mapped to Pendant “Panic” Alarm

If the option is On, a radio Pendant Panic alarm will cause the buzzer at the keypad to sound.

P806E 1-8 Keypads with buzzer mapped to keypad “Panic” Alarm

If the option is On, a Keypad Panic alarm will cause the buzzer at the keypad to sound.

P807E 1-8 Keypads with buzzer mapped to keypad “Fire” Alarm

If the option is On, a Keypad Fire alarm will cause the buzzer at the keypad to sound.

P808E 1-8 Keypads with buzzer mapped to keypad “Medical” Alarm

If the option is On, a Keypad Medical alarm will cause the buzzer at the keypad to sound.

P809E 1-8 Keypads with buzzer mapped to phone line failure

If the option is On, a Telephone Line Failure will cause the buzzer at the keypad to sound.

Pressing any button will silence the beep.

P810E 1-8 Keypads with facility to turn the LED's off after Exit Delay

If the option is On, the LCD display & keypad backlighting on the selected keypad/s will turn off

when all areas assigned to the keypad are Armed or in Stay mode. The backlighting will

automatically turn on again if there is an alarm, an entry delay is started, any button is pressed

at the keypad or when the system is Disarmed.

P811E 1-8 Keypads that will turn off all LED's and backlighting during power failure

If the option is On, the LCD display & keypad backlighting on the selected keypad/s will turn off

when the Mains (AC) supply is off. The backlighting will automatically turn on again when the

power returns. During a power failure, if the LED’s and Backlighting are off, pressing the “Enter”

button will turn them on for 20 seconds.

P812E 1-8 Keypad “A” button special arming options

The “A” button on the keypads with this special button can be assigned a single button arm

function for any or all of the four areas. To arm the alarm, the “A” button must be held down for 2

seconds. As well as assigning an Area or areas to the button, it can also allow arming of Latchkey

Mode. If the area is armed in Latchkey mode using this button and the panel is disarmed by a

non-latchkey user (see P221E-P240E option 8) the panel will report the disarm to a selected

telephone number/s.

P813E 1-8 Keypad “B” button special arming options

The “B” button on the keypads with this special button can be assigned a single button arm

function for any or all of the four areas. To arm the alarm, the “B” button must be held down for 2

seconds. As well as assigning an Area or areas to the button, it can also allow arming of Latchkey

Mode. If the area is armed in Latchkey mode using this button and the panel is disarmed by a

non-latchkey user (see P221E-P240E option 8) the panel will report the disarm to a selected

telephone number/s.

P812 & P813 SPECIAL ARMING OPTIONS

1 = Arms Area A 5 = Arms “Latchkey” Mode

2 = Arms Area B 6 = Spare

3 = Arms Area C 7 = Spare

4 = Arms Area D 8 = Spare

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 102 103

Comentarios a estos manuales

Sin comentarios

AAP Elite S series Especificaciones Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad AAP Elite S series